User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
89
M6100 Web Management User Guide
To display Power Modules:
1. Click System > Chassis >
Advanced > Chassis Power Configuration.
Figure 19. Power Modules
The following table describes the non-configurable Power Module data that is displayed.
Table 46. Power Modules
Field Description
Slot Power module number counted
from left to right.
Type Power module type. Valid values
are Fixed or Removable.
State Power module state. Possible states
are:
• Operational
• Failed
• Not Present
• Not Powered
• Not Applicable
AC Power module input voltage
category in volts. Possible values
are 1
10V, 220V and N/A. N/A
specifies that power source input
voltage cannot be obtained.
To display EPS power modules:
Figure 20. Chassis Power EPS
1. Click System Chassis > Advanced > Chassis Power Configuration.
The following table describes the non-configurable EPS power module data that is displayed.