User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
71
M6100 Web Management User Guide
To enable or disable DHCP service:
1. Use Admin Mode to specify whether the DHCPv6 Service administrative mode is to be
Enabled or Disabled.
The default value is Disable.
2. Use the DHCPv6 Server DUID field to specify the DHCP Unique Identifier (DUID) of the
DHCPv6 server
.
3. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
DHCPv6 Pool Configuration
Use this page to view the currently configured DHCPv6 server pools as well as to add and
remove pools. A DHCPv6 server pool is a set of network configuration information available
to DHCPv6 clients that request the information.
To display the DHCP Pool Configuration page, click System > Services > DHCPv6 Server >
DHCPv6 Pool Configuration.
A screen similar to the following is displayed.