User Manual

Maintenance
525
M6100 Web Management User Guide
• Error Log - Specify error log to retrieve the system error (persistent) log, sometimes
referred to as the event log.
• T
rap Log - Specify trap log to retrieve the system trap records.
• Buffered Log - Specify buf
fered log to retrieve the system buffered (in-memory) log.
• T
ech Support - Specify Tech Support to retrieve the switch information needed for
troubleshooting.
• Crash Logs - Specify Crash Logs to retrieve the system crash logs.
The factory default is Archive.
2. Use Local File Name to specify the local script file name you want to upload.
USB File Upload
Use this menu to upload a file from the switch to USB device.
To display the HTTP File Upload page, click Maintenance
 Upload  USB File Upload.
1. Use File Type to specify what type of file you want to upload:
• Archive - Specify archive (STK) code when you want to retrieve from the operational
flash:
• T
ext Configuration to specify configuration in text mode when you want to retrieve
the stored configuration. The factory default is Archive.
2. Use Image Name to select one of the images from the list:
• Image1 - Specify the code image1 when you want to retrieve.
• Image2 - Specify the code image2 when you want to retrieve.
3. Use USB File to give a name along with path for the file you want to upload.
You may enter
up to 32 characters. The factory default is blank.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.