User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
46
M6100 Web Management User Guide
To configure the SDM Template Preference settings:
1. Use SDM Next T
emplate ID to configure the next active template. It will be active only
after the next reboot. To revert to the default template after the next reboot, use the
Default option. Possible values are:
• Dual IPv4 and IPv6
• IPv4 Routing Default
• IPv4 Data Center
• IPv4 Data Center Plus
• Dual IPv4 and IPv6 Data Center
The following table displays Summary information.
Table 22. SDM Template Preference Summary
Field Description
SDM Current Template ID Displays the current active SDM Template. Possible
values are:
• Dual IPv4 and IPv6
• IPv4-routing Default
• IPv4 Data Center
SDM Template Identifies the Template. The possible values are:
• Dual IPv4 and IPv6
• IPv4-routing Default
• IPv4 Data Center
ARP Entries The maximum number of entries in the IPv4 Address
Resolution Protocol (ARP) cache for routing
interfaces.
IPv4 Unicast Routes The maximum number of IPv4 unicast forwarding
table entries.