User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Managing Device Security
447
M6100 Web Management User Guide
3. If you make changes to the page, click Apply to apply the changes to the system.
Configuration changes take effect immediately.
Field Description
Interface Select the physical or LAG interface for which you
want to display or configure data.
Private VLAN Host Interface Configuration
To display the VLAN Host Interface Configuration page, click Security Traffic Control>
Private VLAN > Private VLAN Host Interface Configuration.
1. Use Host Primary VLAN to set the Primary VLAN ID for Host Association Mode. The
range of the VLAN ID is 2-4093.
2. Use Host Secondary VLAN to set the Secondary VLAN ID for Host
Association Mode. The
range of the VLAN ID is 2-4093.
3. Click Delete to delete the IP subnet-based VLAN from the switch.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. If you make changes to the page, click Apply to apply the changes to the system.
Configuration changes take ef
fect immediately.
Field Description
Interface Select the physical or LAG interface for which you
want to display or configure data.
Operational VLAN(s) Displays the operational VLAN(s).
Private VLAN Promiscuous Interface Configuration
To display the Private VLAN Promiscuous Interface Configuration page, click Security
Traffic Control > Private VLAN > Private VLAN Promiscuous Interface Configuration.