User Manual

Managing Device Security
403
M6100 Web Management User Guide
Accounting Server Configuration
Use the RADIUS Accounting Server Configuration page to view and configure various
settings for one or more RADIUS accounting servers on the network.
To access the RADIUS Accounting Server Configuration page, click Security 
Management Security
 RADIUS  Accounting Server Configuration.
To configure the RADIUS accounting server:
1. In the Accounting Server IP
Address field, specify the IP address of the RADIUS
accounting server to add.
2. In the Accounting Server Name field, enter the name of the accounting server to add.
3. In the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server
. The valid range is 0–65535. If the user has READONLY access, the
value is displayed but cannot be changed.
4. From the Secret Configured drop-down box, select
Yes to add a RADIUS secret in the
next field. After you add the RADIUS accounting server, this field indicates whether the
shared secret for this server has been configured.
5. In the Secret field, type the shared secret to use with the specified accounting server
.
6. From the Accounting Mode drop-down box, enable or disable the RADIUS accounting
mode.
7. T
o delete a configured RADIUS Accounting server, click Delete.
The following table describes RADIUS accounting server statistics available on the page.
Click Clear Counters to clear the accounting server statistics.
Field Description
Accounting Server Address Displays the accounting server associated with the
statistics.
Round Trip Time(secs) Displays the time interval, in hundredths of a second,
between the most recent
Accounting-Response and
the Accounting-Request that matched it from this
RADIUS accounting server.