User Manual

Configuring Switching Information
170
M6100 Web Management User Guide
3. Use the Proxy Querier Model field to Enable or Disable IGMP Proxy Querier on the
system. If disabled, then the IGMP proxy query with source IP 0.0.0.0 is not sent in
response to IGMP leave packet. the default value is Enable.
4. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. Click Update to update the page with the latest information on the switch.
The following table displays information about the global IGMP Snooping status and statistics
on the page.
Field Description
Multicast Control Frame Count The number of multicast control frames that are
processed by the CPU.
Interfaces Enabled for IGMP Snooping A list of all the interfaces currently enabled for IGMP
Snooping.
VLAN IDs Enabled For IGMP Snooping Displays VLAN IDs enabled for IGMP Snooping.
IGMP Snooping Interface Configuration
Use the IGMP Snooping Interface Configuration page to configure IGMP Snooping settings
on specific interfaces.
To access the IGMP Snooping Interface Configuration page, click Switching Multicast 
IGMP Snooping
 Interface Configuration.
To configure IGMP Snooping interface settings:
1. Interface: Lists all physical, VLAN, and LAG interfaces. Select the interface you want to
configure.
2. Use Admin Mode to select the interface mode for the selected interface for IGMP Snooping
for the switch from the menu.
The default is disable.