User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
145
M6100 Web Management User Guide
1. Use Prioritization Type to specify the type of prioritization. It can be Traffic Class or
Remark.
2. Use Class V
alue to specify the CoS tag value to be reassigned for packets received on the
voice VLAN when Remark CoS is enabled.
3. Click Cancel to cancel the configuration on the screen. Reset the data on the screen to the
latest value of the switch.
4. Click Apply to update the switch with the values you entered. If you want the switch to retain
the new values across a power cycle you must perform a save.
OUI-based
From the OUI-based link, you can access the following pages:
• Properties on page 145
• Port Settings on page 146
• OUI Table on page 147
Properties
To display the OUI Properties page, click Switching > Auto-VoIP > OUI-based Properties.