User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
83
M6100 Web Management User Guide
The following table describes the non-configurable Advanced Chassis Status data that is
displayed.
Table 39. Advanced Chassis
Field Description
Unit ID The Unit ID of the specific blade.
Neighbor Unit ID The neighboring blade with which data is exchanged.
Current Current time of heartbeat message reception.
Average Average time of heartbeat messages received.
Min Minimum time of heartbeat messages received.
Max Maximum time of heartbeat messages received.
Dropped Heartbeat message dropped or lost counter.
Status
To clear the sampling information:
The chassis sampling parameters are configured on the Chassis Status page.
1. Click System
Chassis > Advanced > Chassis Status to display the sampling table.
See Figure 13.
In the Clear sampling information > Clear counters field, select the unit to clear the counters.
Possible choices are None, a unit ID number
, or All.
Chassis Backplane-port Configuration
To display Backplane-port Configuration:
1. Click System
Chassis > Advanced > Backplane-port Configuration.
2. Select either the Unit ID or All.
• Select the Unit ID field to display information for the selected unit.
• Select All to display information for all units.
Figure 14. Backplane-Port Configuration