User Manual

Configuring System Information
69
M6100 Web Management User Guide
8. Click Delete to remove all entries or a specified one from UDP Relay Table.
9. Click Update to update the page with the latest information on the switch.
The following table describes the UDP Relay Global Configuration fields.
Table 33. UDP Relay Global Configuration
Field Description
Hit Count Show the number of UDP packets hitting the UDP
port
UDP Relay Interface Configuration
To display the UDP Relay Interface Configuration page, click System > Services > UDP
Relay> UDP Relay Interface Configuration. A screen similar to the following is displayed.
1. Use Interface to select an Interface to be enabled for the UDP Relay.
2. Use Server Address to specify the UDP Relay Server
Address in x.x.x.x format.
3. Use UDP Port to specify UDP Destination Port.
The following ports are supported:
• DefaultSet - Relay UDP port 0 packets.
This is specified if no UDP port is selected
when creating a Relay server.
• dhcp - Relay DHCP (UDP port 67) packets.
• domain - Relay DNS (UDP port 53) packets.
• isakmp - Relay ISAKMP (UDP port 500) packets.
• mobile-ip - Relay Mobile IP (UDP port 434) packets
• nameserver - Relay IEN-1
16 Name Service (UDP port 42) packets
• netbios-dgm - Relay NetBIOS Datagram Server (UDP port 138) packets
• netbios-ns - Relay NetBIOS Name Server (UDP port 137) packets
• ntp - Relay network time protocol (UDP port 123) packets.
• pim-auto-rp - Relay PIM auto RP (UDP port 496) packets.
• rip - Relay RIP (UDP port 520) packets
• tacacs - Relay
TACACS (UDP port 49) packet
• tftp - Relay
TFTP (UDP port 69) packets
• time - Relay time service (UDP port 37) packets