User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
65
M6100 Web Management User Guide
Table 31. DHCP Relay Status
Field Description
Requests Received The total number of DHCP requests received from all
clients since the last time the switch was reset.
Requests Relayed The total number of DHCP requests forwarded to the
server since the last time the switch was reset.
Packets Discarded The total number of DHCP packets discarded by this
Relay
Agent since the last time the switch was reset.
DHCP L2 Relay
From the DHCP L2 Relay link, you can access the following pages:
• DHCP L2 Relay Global Configuration on page 65
• DHCP L2 Relay Interface Configuration on page 66
• DHCP L2 Relay Interface Statistics on page 66
DHCP L2 Relay Global Configuration
To display the DHCP L2 Relay Global Configuration page, click System > Services > DHCP
L2 Relay> DHCP L2 Relay Global Configuration. A screen similar to the following is
displayed.
DHCP L2 Relay Global Configuration
1. Use Admin Mode to enable or disable the DHCP L2 Relay on the switch.
The default is
Disable.