User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Monitoring the System
510
M6100 Web Management User Guide
6. Severity Filter - A log records messages equal to or above a configured severity threshold.
Select the severity option by selecting the corresponding line on the drop-down entry field.
These severity levels have been enumerated below:
• Emergency (0): system is unusable
• Alert (1): action must be taken immediately
• Critical (2): critical conditions
• Error (3): error conditions
• W
arning (4): warning conditions
• Notice(5): normal but significant conditions
• Informational(6): informational messages
• Debug(7): debug-level messages
Trap Logs
This screen lists the entries in the trap log. The information can be retrieved as a file by using
System Utilities, Upload File from Switch.
To access the Trap Logs page, click Monitoring Logs > Trap Logs.
The following table describes the Trap Log information displayed on the screen.
The page also displays information about the traps that were sent.
Click Clear to clear all the counters.
This resets all statistics for the trap logs to the default
values.