User Manual

Configuring System Information
51
M6100 Web Management User Guide
5. Click Clear to clear the configuration, resetting all statistics for the selected interface to
default values.
6. Click Apply to update the configuration on the switch.
7. Click Update to update the page with the latest information on the switch.
Configure Green Ethernet Remote Device Details
 To configure the green Ethernet remote device information:
1. Select the Interface for which data is to be displayed or configured.
Table 24, Green Ethernet Remote Device Information on page 51 describes the
non-configurable fields.
Tx_dll_enabled Data Link Layer Enabled: Initialization status of the
EEE transmit Data Link Layer management function
on the local system.
Tx_dll_ready Data Link Layer ready: This variable indicates that
the tx system initialization is complete and is ready to
update/receive LLDPDU containing EEE
TLV.
Rx_dll_enabled Status of the EEE capability negotiation on the local
system.
Rx_dll_ready Data Link Layer ready: This variable indicates that
the rx system initialization is complete and is ready to
update/receive LLDPDU containing EEE
TLV.
Time Since Counters Last Cleared Time Since Counters Last Cleared (since the time of
power up, or after eee counters are cleared).
Table 24. Green Ethernet Remote Device Information
Field Description
Remote ID Specifies the remote client identifier assigned to the
remote system.
Remote Tw_sys_tx (uSec) Integer that indicates the value of Tw_sys that the
remote system can support.
Table 23. Green Ethernet Local Device Information
Field Description