User Manual

Field Description
Broadcast Storm Recovery Mode Enable or disable this option by selecting the
corresponding line on the drop-down entry field.
When you specify Enable for Broadcast Storm
Recovery and the broadcast traf
fic on the specified
Ethernet port exceeds the configured threshold, the
switch blocks (discards) the broadcast traffic. The
factory default is enable.
Broadcast Storm Recovery Level Type Specify the Broadcast Storm Recovery Level as a
percentage of link speed or as packets per second.
Broadcast Storm Recovery Level Specify the threshold at which storm control
activates.
The factory default is 5 percent of port
speed for pps type.
Broadcast Storm Control Action Provides configurability to shut down the port when
the configured threshold of the broadcast storm
recovery feature gets breached. Select the option to
either ShutDown or RateLimit mode.
The default is
RateLimit.
Multicast Storm Recovery Mode Enable or disable this option by selecting the
corresponding line on the drop-down entry field.
When you specify Enable for Multicast Storm
Recovery and the multicast traf
fic on the specified
Ethernet port exceeds the configured threshold, the
switch blocks (discards) the multicast traffic. The
factory default is disabled.
Multicast Storm Recovery Level Type Specify the Multicast Storm Recovery Level as a
percentage of link speed or as packets per second.
Multicast Storm Recovery Level Specify the threshold at which storm control
activates.
The factory default is 5 percent of port
speed for pps type.
Unicast Storm Recovery Mode Enable or disable this option by selecting the
corresponding line on the drop-down entry field.
When you specify Enable for Unicast Storm
Recovery and the unicast traf
fic on the specified
Ethernet port exceeds the configured threshold, the
switch blocks (discards) the unicast traffic. The
factory default is disabled.
Unicast Storm Recovery Level Type Specify the Unicast Storm Recovery Level as a
percentage of link speed or as packets per second.
Unicast Storm Recovery Level Specify the threshold at which storm control
activates.
The factory default is 5 percent of port
speed for pps type.
Managing Device Security
450
M6100 Web Management User Guide