User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
230
M6100 Web Management User Guide
To display the IP Interface Configuration page, click Routing IP Advanced IP Interface
Configuration.
1. Use Go To Interface to enter the interface in unit/slot/port format and click Go. The
entry corresponding to the specified interface is selected.
2. Use Port to select the interface for which data is to be displayed or configured.
3. Use Description to enter the description for the interface.
4. Use IP Address
Configuration Method to enter the method by which an IP address is
configured on the interface. There are three methods: None, Manual, and DHCP. By default
the method is None. Use the None method to reset the DHCP method.