User Manual

Configuring Switching Information
146
M6100 Web Management User Guide
1. Use VoIP VLAN ID to configure VoIP VLAN ID on the switch. There is no default VLAN
for auto-voip, you must create a VLAN for it first.
2. Use OUI-based priority to configure OUI-based priority on the switch. Default value is 7.
3. Click Cancel to cancel the configuration on the screen. Reset the data on the screen to the
latest value of the switch.
4. Click Apply to update the switch with the values you entered. If you want the switch to retain
the new values across a power cycle you must perform a save.
Port Settings
To display the OUI Port Settings page, click Switching > Auto-VoIP > OUI-based Port
Settings.
1. Use Interface to select the interface for which data is to be displayed or configured.
2. Use Auto V
oIP Mode to Enable or Disable AutoVoIP mode on the selected interface. Auto
VoIP is disabled by default.
3. Use Go T
o Interface to select an interface by entering its number.
4. Click Cancel to cancel the configuration on the screen. Reset the data on the screen to the
latest value of the switch.
5. Click Apply to update the switch with the values you entered. If you want the switch to retain
the new values across a power cycle you must perform a save.