User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
140
M6100 Web Management User Guide
1. Use IP Address to specify a valid IP Address bound to VLAN ID. Enter the IP Address
in dotted decimal notation.
2. Use Subnet Mask to specify a valid Subnet Mask of the IP
Address. Enter the Subnet mask
in dotted decimal notation.
3. Use VLAN ID to specify a VLAN ID in the range of (1 to 4093).
4. Click Add to add a new IP subnet-based VLAN.
5. Click Delete to delete the IP subnet-based VLAN selected.
Port DVLAN Configuration
To display the Port DVLAN Configuration page, click Switching VLAN Advanced Port
DVLAN Configuration.
1. Use Interface to select the physical interface for which you want to display or configure
data. Select 'All' to set the parameters for all ports to same values.