Installation Guide

15
2. Connect an Ethernet cable from an Ethernet port on your computer
to an Ethernet network port on the switch or to the OOB port on the
switch.
3. Launch a web browser and enter the default IP address of the switch
in the address eld of the browser:
• For access over an Ethernet network port, enter
169.254.100.100.
• For access over the OOB port, enter 192.168.0.239.
A login window displays.
4. Enter admin for the user name, leave the password eld blank, and
click the LOGIN button.
The System Information page displays.
5. Select System > Management > Initial Setup.
6. Congure the IP address settings of the management interface and
OOB port.
7. Click the Apply button.
Your setting are saved.
For information about using the local browser user interface (UI), see the
user manual, which you can download by visiting
netgear.com/support/download/.