User Manual

Configuring System Information
74
M6100 Web Management User Guide
 To configure DHCPv6 Interface settings:
1. Select the Interface with the information to view or configure.
You can either:
a. In the Go T
o Interface field, enter the interface in unit/slot/port format and click Go.
The entry corresponding to the specified interface will be selected.
b. Select the check box from the list of Interfaces configured for DHCPv6 server
functionality
.
2. In the Admin Mode list, select to Enable or Disable DHCPv6 mode to configure server
functionality
. DHCPv6 server and DHCPv6 relay functions are mutually exclusive.
3. In the Pool Name field, specify the DHCPv6 pool containing stateless and/or prefix
delegation parameters.
4. Rapid Commit is an optional parameter
. In the Rapid Commit list, select to Enable or
Disable allowing an abbreviated exchange between the client and server.
5. In the Preference field, specify the preference value used by clients to determine the
preference between DHCPv6 servers. V
alid values are 0 to 4294967295. The default value
is 0.
6. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
7. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
DHCPv6 Bindings Information
Use this page to view entries in the DHCP Bindings table. After a client acquires IPv6
configuration information from the DHCPv6 server, the server adds an entry to its database.
The entry is called a binding.
To display the DHCPv6 Bindings Information page, click System > Services > DHCPv6
Server > DHCPv6 Bindings Information.
A screen similar to the following is displayed.