User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
63
M6100 Web Management User Guide
DHCP Conflicts Information
To display the DHCP Conflicts Information page, click System > Services > DHCP Server>
DHCP Conflicts Information. A screen similar to the following is displayed.
1. Choose:
• All Address
Conflicts to specify all address conflicts to be deleted.
• Specific Address
Conflict to specify a specific dynamic binding to be deleted.
The following table describes the DHCP Conflicts Information fields.
Table 30.
Field Description
IP Address Specifies the IP Address of the host as recorded on
the DHCP server
.
Detection Method Specifies the manner in which the IP address of the
hosts were found on the DHCP Server
.
Detection Time Specifies the time when the conflict was detected in
N days NNh:NNm:NNs format with respect to the
system up time.
DHCP Conflicts Information
Lease Time Left Specifies the Lease time left in Days, Hours and
Minutes dd:hh:mm format.
Type Specifies the Type of Binding: Dynamic / Manual.
Field Description