User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
54
M6100 Web Management User Guide
To access this page, click System Management Green Ethernet Green Ethernet LPI
History.
To configure the port GreenMode EEE history:
1. Select the Interface for which data is to be displayed or configured.
2. The Sampling Interval is the Interval at which EEE LPI data needs to be collected.
This is
a global setting and is applied to all interfaces. The Range is (30 to 36000).The Default
value is 3600.
3. The Max Samples is the number of samples to keep.
This is a global setting and is applied
to all interfaces. The Range is (1 to 168).The Default value is 168.
Table 26, Interface Green Mode EEE LPI History non-configurable fields.
Table 26. Interface Green Mode EEE LPI History
Field Description
Percentage LPI time per Chassis Time spent in LPI mode per chassis since EEE
counters are last cleared.
Sample No. Sample Index.
Time Since The Sample Was Recorded Time Since The Sample Was Recorded. Each time
the page is refreshed it shows a dif
ferent time as it
reflects the difference in current time and time at
which the sample was recorded.