User Manual

Field Description
Number of Traps Since Last
Reset
The number of traps that have occurred since the switch last reboot.
Trap Log Capacity The maximum number of traps stored in the log. If the number of traps
exceeds the capacity
, the entries will overwrite the oldest entries.
Number of Traps since log
last viewed
The number of traps that have occurred since the traps were last displayed.
Displaying the traps by any method (terminal interface display
, Web display,
upload file from switch etc.) will cause this counter to be cleared to 0.
Log The sequence number of this trap.
System Up Time The time at which this trap occurred, expressed in days, hours, minutes and
seconds since the last reboot of the switch.
Trap Information identifying the trap.
Monitoring the System
511
M6100 Web Management User Guide
Event Logs
This panel displays the event log, which contains error messages from the system. Event log
is not cleared on a system reset.
To access the Event Log page, click Monitoring  Logs > Event Logs.
The following table describes the Event Log information displayed on the screen.
Use the buttons at the bottom of the page to perform the following actions:
• Click Clear to clear the messages out of the Event Log.
• Click Update to update the page with the latest information on the switch.
Field Description
Entry The sequence number of the event.
Type The type of the event.
File Name The file in which the event originated.