User Manual

Managing Device Security
419
M6100 Web Management User Guide
Host Keys Download
Use this page to transfer a file to or from the switch.
To display the Host Keys Download page, click Security
 Access > SSH  Host Keys
Download.
1. Use File Type to specify the type of file you want to transfer:
• SSH-1 RSA Key File - SSH-1 Rivest-Shamir-Adleman (RSA) Key File
• SSH-2 RSA Key PEM File - SSH-2 Rivest-Shamir-Adleman (RSA) Key File (PEM
Encoded)
• SSH-2 DSA Key PEM File - SSH-2 Digital Signature
Algorithm (DSA) Key File (PEM
Encoded)
2. Use T
ransfer Mode to specify the protocol to use to transfer the file:
• TFTP -
Trivial File Transfer Protocol
• SFTP - Secure File
Transfer Program
• SCP - Secure Copy
3. Use Server Address
Type to specify either IPv4, IPv6, or DNS to indicate the format of the
TFTP/SFTP/SCP Server Address field. The factory default is IPv4.
4. Use Server Address to enter the IP address or DNS hostname of the server in accordance
with the format indicated by the Server
Address Type. The factory default is the IPv4
address 0.0.0.0.
5. Use Remote File Path to Enter the path of the file which you want to download.
You may
enter up to 96 characters. The factory default is blank.
6. Use Remote File Name to enter the name of the file on the
TFTP server you want to
download. You may enter up to 32 characters. The factory default is blank.
7. Click Apply to start downloading the Host Key file. Note that to download SSH key files SSH
must be administratively disabled and there can be no active SSH sessions.
Telnet
To display the Telnet page, click Security  Access > Telnet.