User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Quality of Service
383
M6100 Web Management User Guide
To configure the global DiffServ mode:
1. Select the administrative mode for Dif
fServ:
• Enable. Dif
ferentiated Services are active.
• Disable.
The DiffServ configuration is retained and can be changed, but it is not
active.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
3. If you make changes to the page, click Apply to apply the changes to the system.
The following table describes the information displayed in the Status table on the DiffServ
Configuration page:
Field Description
Class table Displays the number of configured DiffServ classes
out of the total allowed on the switch.
Class Rule table Displays the number of configured class rules out of
the total allowed on the switch.
Policy table Displays the number of configured policies out of the
total allowed on the switch.
Policy Instance table Displays the number of configured policy class
instances out of the total allowed on the switch.