User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
339
M6100 Web Management User Guide
Table 134. DVMRP Route
Field Description
Source Address The network address that is combined with the source mask to identify the
sources for this entry
.
Source Mask The network subnet mask used with the source IP address to identify the
sources for this entry
.
Upstream Neighbor The address of the upstream neighbor (for example, RPF neighbor) from
which IP datagrams from these sources are received.
Interface The interface on which IP datagrams sent by these sources are received. A
value of 0 typically means the route is an aggregate for which no next-hop
interface exists.
Metric The distance in hops to the source subnet.
Expiry Time The amount of time remaining before this prune should expire at the
upstream neighbor
. If no prune messages have been received from
downstream neighbors, this is set to value of the default prune lifetime timer,
otherwise it is set to the smallest received value or the default timer,
whichever is less.
Up Time The time since the route represented by this entry was learned by the router.
Multicast IGMP
From the Routing > Multicast > IGMP link, you can access the following pages:
• IGMP Global Configuration
• IGMP Routing Interface Configuration on page 340
• IGMP Routing Interface Statistics on page 341
• IGMP Groups on page 342
• IGMP Membership on page 343
• IGMP Proxy Interface Configuration on page 344
• IGMP Proxy Interface Statistics on page 345
• IGMP Proxy Membership on page 346
IGMP Global Configuration
To display the Multicast IGMP Global Configuration page, click Routing Multicast IGMP
Global Configuration. The following page is displayed.