User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
338
M6100 Web Management User Guide
Table 133, DVMRP Prune describes the non-configurable data that is displayed.
Click Update to update the page with the latest information on the switch.
Table 133. DVMRP Prune
Field Description
Group IP The group address which has been pruned.
Source IP The IP address used with the source mask to identify the source network for
this table entry
.
Source Mask The network mask used with the source IP address.
Expiry Time The amount of time remaining before this prune should expire at the
upstream neighbor
. If no prune messages have been received from
downstream neighbors, this is set to value of the default prune lifetime timer,
otherwise it is set to the smallest received value or the default timer,
whichever is less.
DVMRP Route
To display the Multicast DVMRP Route page, click Routing Multicast DVMRP DVMRP
Route. The following page is displayed.
Table 134, DVMRP Route describes the non-configurable data that is displayed.
Click Update to update the page with the latest information on the switch.