User Manual

Routing
311
M6100 Web Management User Guide
 To display the OSPFv3 Neighbor Table page, click Routing > OSPFv3 > Advanced >
Neighbor Table. The following page is displayed.
Table 117, Advanced OSPFv3 Neighbor Table on page 311 describes the non-configurable
data that is displayed.
Table 117. Advanced OSPFv3 Neighbor Table
Field Description
Interface Displays the interface for which data is to be
displayed or configured. Slot 0 is the base unit.
Interface Identifier The interface ID that the neighbor advertises in its
Hello packets on this link.
Router ID A 32-bit integer in dotted decimal format
representing the Router ID of the neighbor on the
selected Interface.
Area ID A 32-bit integer in dotted decimal format
representing the area common to the neighbor
selected.
Options A Bit Mask corresponding to the neighbor's options
field.
Router Priority The priority of this neighbor in the designated router
election algorithm.
A value of 0 signifies that the
neighbor is not eligible to become the designated
router on this particular network.
State The state of the relationship with this neighbor.
Dead Time The amount of time, in seconds, since the last Hello
was received from
Adjacent Neighbors. Set to 0 for
neighbors in a state less than or equal to Init.
Events The number of times this neighbor relationship has
changed state, or an error has occurred.
Retransmission Queue Length An integer representing the current length of the
selected neighbor's retransmit queue.
• Click Clear to clear all the neighbors in the table.
• Click Update to update the page with the latest information on the switch.