User Manual

Configuring Switching Information
194
M6100 Web Management User Guide
12. Click Cancel to update the switch with the values you entered. If you want the switch to
retain the new values across a power cycle you must perform a save.
13. Click Apply to update the switch with the values you entered. If you want the switch to retain
the new values across a power cycle you must perform a save.
Table 74 describes the non-configurable data that is displayed.
Table 74.
Field Description
Media Type The media type.
Port Type For normal ports this field will be Normal. Otherwise
the possible values are:
• Mirrored — The port is a mirrored port on which
all the traf
fic will be copied to the probe port.
• Probe — Use this port to monitor a mirrored port.
• T
runk Member — The port is a member of a Link
Aggregation trunk. Look at the LAG screens for
more information.
Admin Status When the port’s Admin mode is D-Disable, this field
indicates the reason. Possible reasons are:
• STP — Spanning Tree Protocol violation.
• UDLD — UDLD protocol violation.
• XCEIVER — Unsupported SFP/SFP+ inserted.
Physical Status Indicates the port speed and duplex mode.
Link Status Indicates whether the Link is up or down.
ifIndex The ifIndex of the interface table entry associated
with this port.
Port Configuration
Port Description
This page configures and displays the description for all ports in the box.
To access the Port Description page, click Switching
 Ports  Port Description.