User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
180
M6100 Web Management User Guide
1. Interface: Select the interface for which you want Multicast Router to be enabled.
2. Use Multicast Router to enable or disable Multicast Router on the selected interface.
Multicast Router VLAN Configuration
To access the Multicast Router VLAN Configuration page, click Switching Multicast MLD
Snooping
Multicast Router VLAN Configuration.
1. Use Interface to select the interface for which you want Multicast Router to be enabled.
2. Use VLAN ID to select the VLAN ID for which the Multicast Router Mode is to be Enabled or
Disabled.
3. Use Multicast Router to enable or disable the multicast router for the VLAN ID.
MLD Snooping Querier Configuration
Use this page to configure the parameters for MLD Snooping Querier. Note that only a user
with Read/Write access privileges may change the data on this screen.
To access the MLD Snooping Querier Configuration page, click Switching Multicast MLD
Snooping
Querier Configuration.