User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
113
M6100 Web Management User Guide
LLDP-MED
From the LLDP-MED link, you can access the following pages:
• LLDP-MED Global Configuration on page 113
• LLDP-MED Interface Configuration on page 114
• LLDP-MED Local Device Information on page 115
• LLDP-MED Remote Device Information on page 117
• LLDP-MED Remote Device Inventory on page 120
LLDP-MED Global Configuration
Use the LLDP-MED Global Configuration page to specify LLDP-MED parameters that are
applied to the switch.
To display this page, click System LLDP LLDP-MED Global Configuration. A screen
similar to the following is displayed.
1. Use Fast Start Repeat Count to specify the number of LLDP PDUs that will be
transmitted when the protocol is enabled. The range is from (1 to 10). Default value of
fast repeat count is 3.
The following table describes the LLDP-MED Global Configuration fields.
System Name Specifies model name of the remote device.
Remote Port ID
Specifies the port component associated with the
remote system.
Field Description