Installation Guide

5
Install the chassis
You can either rack-mount the chassis into a rack or install the chassis
using the included rails. For information about installing the chassis using
rails, see the Campus Edge and SMB Core Chassis Switches M6100 Series
Hardware Installation Guide.
To rack-mount the chassis:
1. Partially screw two of the included screws into the rack where you
want the bottom of the chassis to rest.
2. Rest the bottom of the chassis’s brackets on the two screws.
3. Attach the rest of the screws to secure the bracket to the rack.
Console
XCM8948
Supervisor
PWR /
Status
Reset
PoE (Max 60W per port): Off = no PD Green = PoE powered Yellow = PoE fault RJ45 SPD/Link/Act Mode: Green = link at 1G Yellow = Link at 10/100M Blink = ACT
OOB
USB
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1