User Manual

Configuring System Information
84
M6100 Web Management User Guide
The following table describes the non-configurable Backplane-port Configuration data that
is displayed.
Table 40. Backplane-Port Configuration
Field Description
Unit ID The Unit ID of the specific blade.
Port Displays the backplane-port on the given blade.
Link Status Displays the link status (Up/Down) of the port.
Link Speed (Gbps) Displays the maximum speed of the backplane-port.
Transmit Data Rate (Mbps) Displays the approximate transmit rate on the backplane-port.
Transmit Error Rate (Error/s) Displays the number of errors in transmit packets per second.
Total Transmit Errors Displays the total number of errors in transmit packets since
bootup.
The counter may wrap.
Receive Data Rate (Mbps) Displays the approximate receive rate on the backplane-port.
Receive Error Rate (Error/s) Displays the number of errors in receive packets per second.
Total Receive Errors Displays the total number of errors in receive packets since
bootup.
The counter may wrap.
Link Flaps Displays a backplane-port counter that increments whenever a
backplane-port link transitions to the down state.
• Click Update to update the page with the latest information on the switch.
• Click the Cancel button to cancel the configuration on the screen. Reset the data on the
screen to the latest value of the switch.
• Click the Apply button to send the updated configuration to the switch. Configuration
changes take ef
fect immediately.
Chassis Backplane-port Diagnostics
 To display Backplane-port diagnostics:
Use the Backplane-port Diagnostics page to display low-level statistics such as APT counts
and RPC counts, etc. for all the backplane-ports in the given chassis.
1. Click System
 Chassis > Advanced > Backplane-port Diagnostics.
2. Select either the Unit ID or All.
• Select the Unit ID field to display information for the selected unit.
• Select All to display information for all units.