User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
50
M6100 Web Management User Guide
Table 23, Green Ethernet Local Device Information describes the non-configurable fields.
Table 23. Green Ethernet Local Device Information
Field Description
Cumulative Energy Saved on this port due to Green
Mode(s) (Watts * Hours)
Cumulative Energy saved due to all Green Modes
enabled on this port in (Watts * Hours).
Operational Status Indicates whether Energy Detect Admin Mode is
currently Operational (“Enabled”).
Reason Reason for the current operational status of Energy
Detect Admin Mode.
Operational Status Indicates whether Short Reach Admin Mode is
currently Operational(“Enabled”).
Reason Reason for the current operational status of Short
Reach Admin Mode.
Rx Low Power Idle Event Count This field is incremented each time MAC RX enters
LP IDLE state. Shows the total number of Rx LPI
Events since EEE counters are last cleared.
Rx Low Power Idle Duration (uSec) This field indicates duration of Rx LPI state in 10us
increments. Shows the total duration of Rx LPI since
the EEE counters are last cleared.
Tx Low Power Idle Event Count This field is incremented each time MAC TX enters
LP IDLE state. Shows the total number of Tx LPI
Events since EEE counters are last cleared.
Tx Low Power Idle Duration (uSec) This field indicates duration of Tx LPI state in 10us
increments. Shows the total duration of Tx LPI since
the EEE counters are last cleared.
Tw_sys_tx (uSec) Integer that indicates the value of Tw_sys that the
local system can support.
Tw_sys_tx Echo (uSec) Integer that indicates the remote system's Transmit
Tw_sys that was used by the local system to
compute the Tw_sys that it wants to request from the
remote system.
Tw_sys_rx (uSec) Integer that indicates the value of Tw_sys that the
local system requests from the remote system.
Tw_sys_rx Echo (uSec) Integer that indicates the remote systems Receive
Tw_sys that was used by the local system to
compute the Tw_sys that it can support.
Fallback Tw_sys (uSec) Integer that indicates the value of fallback Tw_sys
that the local system requests from the remote
system.










