User Manual

Managing Device Security
492
M6100 Web Management User Guide
selection one of the DSCP keyword from a drop-down box. If a value is to be selected by
specifying its numeric value, then select the 'Other' option in the drop-down box and a text
box will appear where the numeric value of the DSCP can be entered.
22. Rate Limit Conform Data Rate - V
alue of Rate Limit Conform Data Rate specifies the
conforming data rate of IPv6 ACL Rule. Valid values are (1 to 4294967295) in Kbps.
23. Rate Limit Burst Size - V
alue of Rate Limit Burst Size specifies burst size of IPv6 ACL
Rule. Valid values are (1 to 128) in Kbytes.
24. T
ime Range - Name of time range associated with the IPv6 ACL Rule.
25. Rule Status - Displays if the
ACL rule is active or inactive. Blank means that no timer
schedules are assigned to the rule.
26. T
o modify an existing IP Extended ACL rule, click the Rule ID. The number is a hyperlink to
the Extended IPv6 ACL Rule Configuration (100-199) screen, which is used for configuration
ACL Rules. Click the Add button on the IP Extended Rules screen.
27. For standard
ACL Rule Configuration (1-99), click the Add button on the IPv6 Rules screen.
28. Use Delete to select the check box of the rule you want to delete and click Delete.
IP Binding Configuration
When an ACL is bound to an interface, all the rules that have been defined are applied to the
selected interface. Use the IP Binding Configuration page to assign ACL lists to ACL
Priorities and Interfaces.
To display the IP Binding Configuration page, click Security
 ACL > Advanced  IP Binding
Configuration.
To configure IP ACL interface bindings:
1. Select an existing IP
ACL from the ACL ID menu.