User Manual

Routing
366
M6100 Web Management User Guide
• Click Clear to clear all the MLD traffic.
• Click Update to update the page with the latest information on the switch.
IPv6 MLD Proxy Interface Configuration
To display the IPv6 Multicast MLD Proxy Interface Configuration page, click Routing IPv6
Multicast
 MLD  Proxy Interface Configuration. The following page is displayed.
 IPv6 MLD Proxy Interface Configuration
1. In the Interface list, select the interface.
2. In the Admin Mode list, select the Enable or Disable option to set the administrative status
of MLD Proxy on the selected interface.
The default is disable. Routing, MLD and Multicast
global admin modes should be enabled to enable MLD Proxy interface mode.
3. In the Unsolicited Report Interval field, enter the unsolicited time interval value in seconds.
The Unsolicited Report Interval is the time between repetitions of a host's initial report of
membership in a group. V
alid values are 1 to 260. The default value is 1.
4. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Reports Received The number of valid MLD reports received by the router.
Reports Sent The number of valid MLD reports sent by the router.
Leaves Received The number of valid MLD leaves received by the router.
Leaves Sent
The number of valid MLD leaves sent by the router.
Field Description