User Manual

Routing
253
M6100 Web Management User Guide
ARP Create
Use this screen to add an entry to the Address Resolution Protocol table.
To display the Static ARP Cache page, click Routing
 ARP Advanced  ARP Create.
ARP Static Configuration
Use this screen to add an entry to the Address Resolution Protocol table.
1. Use IP Address to enter the IP address you want to add. It must be the IP address of a
device on a subnet attached to one of the switch's existing routing interfaces.
2. Use MAC Address to specify the unicast MAC address of the device. Enter the address as
six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.
3. Click Add to add a new static
ARP entry to the switch.
4. Click Delete to delete an existing static
ARP entry from the switch.
5. Click Update to update the page with the latest information on the switch.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
7. Click Apply to change the MAC
Address mapping to the IP. Configuration changes take
effect immediately.
ARP Cache
Use this screen to show ARP entries in the ARP Cache.
Field Description
Port The associated Unit/Slot/Port of the connection
IP Address Displays the IP address. It must be the IP address of
a device on a subnet attached to one of the switch's
existing routing interfaces.