User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
233
M6100 Web Management User Guide
Table 86. Secondary IP
Field Description
VLAN ID The VLAN ID associated with the displayed or configured interface.
Primary IP Address The Primary IP Address for the interface.
IPv6
The Routing IPv6 folder contains links to the following web pages that configure and
display IP routing data:
• IPv6 Basic on page 233
• IPv6 Advanced on page 235
IPv6 Basic
From the Routing IPv6 > Basic link, you can access the following pages:
• IPv6 Global Configuration
• IPv6 Route Table on page 234
IPv6 Global Configuration
Use this page to configure IPv6 routing parameters for the switch, as opposed to an
interface.
To display the IPv6 Global Configuration page, click Routing IPv6 Basic Global
Configuration. The following page is displayed.
Configure IPv6 Global Configuration.
1. In the IPv6 Unicast Routing field, select the option to globally Enable or Disable IPv6
unicast routing.
2. In the Hop Limit field, enter a value for the unicast hop count used in IPv6 packets
originated by the node.
The value is also included in router advertisements. Valid values for
hops are 1 to 255, inclusive. The default is Not Configured, which means that a value of
zero is sent in router advertisements.