User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
123
M6100 Web Management User Guide
Global Configuration
To display this page, click System ISDP Advanced Global Configuration. A screen
similar to the following is displayed.
1. Use Admin Mode to specify whether the ISDP Service is to be Enabled or Disabled.
The default value is Enabled.
2. Use T
imer to specify the period of time between sending new ISDP packets. The range is 5
to 254 seconds. Default value is 30 seconds.
3. Use Hold T
ime to specify the hold time for ISDP packets that the switch transmits. The hold
time specifies how long a receiving device should store information sent in the ISDP packet
before discarding it. The range 10 to 255 seconds. Default value is 180 seconds.
4. Use V
ersion 2 Advertisements to enable or disable the sending of ISDP version 2 packets
from the device. The default value is Enabled.
The following table describes the ISDP Advanced Global Configuration fields.
Table 66. ISDP Advanced Global Configuration
Field Description
Neighbors table last time changed Displays when the Neighbors table last changed.
Device ID Displays the device ID of this switch.
Device ID format capability Displays the device ID format capability.
Device ID format Displays the device ID format.
Interface Configuration
To display this page, click System ISDP Advanced Interface Configuration. A screen
similar to the following is displayed.