Owner's Manual

Appendix D. Supported Protocols, MIBs, and Standards | 919
NETGEAR 8800 User Manual
netgearQosProfileRowStatus The status of the
netgearQosProfile entry.

This object can be set to:
active(1); 
createAndGo(4);
createAndWait(5); 
destroy(6). 
The following values may be
read: active(1); 
notInService(2);
notReady(3).
netgearIQosProfileTable netgearIQosProfileIndex XCM8800 does not support
global QoS profile settings in
CLI; it supports per port
settings only. Walks of this
table display the default
values with which the ports
are initialized.
netgearIQosProfileName A unique ingress Qos profile
name.
netgearIQosProfileMinBwType The type of the current
minimum bandwidth setting.
A value of 1 signifies that the
minimum bandwidth value is
a percentage of the
configurable port bandwidth.
A value of 2 or 3 signifies a
guaranteed minimum
available bandwidth in Kbps
or Mbps respectively.
netgearIQosProfileMinBw The guaranteed minimum
bandwidth for this queue,
expressed as either a
percentage or a specific
bandwidth value, as
specified by the value of
netgearIQosProfileMinBw

Type.
netgearIQosProfileMaxBwType The type of the current
maximum bandwidth setting.
A value of 1 signifies that the
maximum bandwidth value is
a percentage of the
configurable port bandwidth.
A value of 2 or 3 signifies a
maximum allowed bandwidth
in Kbps or Mbps
respectively.
Table/Group
Supported Variables Comments