Owner's Manual

916 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
NETGEAR-V2TRAP-MIB
This MIB defines the following NETGEAR-specific SNMPv2c traps generated by NETGEAR
devices.
NETGEAR-STPEXTENSIONS-MIB
The following tables, groups, and variables are supported in this MIB.
NETGEAR-STPNOTIFICATIONS-MIB
This MIB defines the following NETGEAR-specific STP Notifications trap generated by
NETGEAR devices.
netgearPowerSupplyFail One or more sources of power to this agent has failed. Presumably a
redundant power-supply has taken over.
netgearModuleStateChanged Signifies that the value of the netgearSlotModuleState for the
specified netgearSlotNumber has changed. Traps are reported only
for significant states.
Trap Comments
netgearHealthCheckFailed CPU HealthCheck has failed.
netgearMsmFailoverTrap MSM failover occurred.
netgearBgpM2PrefixReachedThreshold The netgearBgpPrefixReachedThreshold notification is generated
when the number of prefixes received over this peer session reaches
the threshold limit.
netgearBgpM2PrefixMaxExceeded The netgearBgpPrefixMaxExceeded notification is generated when
the number of prefixes received over this peer session reaches the
maximum configured limit.
netgearNMSInventoryChanged These traps are not generated by the XCM8800 SNMP agent but by
the EPICenter NMS.
netgearNMSTopologyChanged
Table/Group
Supported Variables Comments
netgearStpDomainTable All objects This table contains STP information per STP
domain.
netgearStpPortTable All objects This table contains port-specific information per
STP domain.
netgearStpVlanPortTable All objects This table contains information of the ports
belonging to a STP domain on a per VLAN basis.
Trap Comments