Owner's Manual

Appendix D. Supported Protocols, MIBs, and Standards | 913
NETGEAR 8800 User Manual
.
Table/Group Supported Variables Comments
netgearTargetAddrExtTable netgearTargetAddrExtIgnoreMP
Model
When this object is set to TRUE, the
version of the trap/notification sent to
the corresponding management
target (trap receiver) will be the same
as in releases of NETGEAR prior to
7.1.0. Thus, the value of the
snmpTargetParamsMPModel object
in the snmpTargetParamsTable will
be ignored while determining the
version of the trap/notification to be
sent. When a trap-receives created
via the RMON trapDestTable or from
the CLI command 'configure snmp
add trapreceiver ....', the value of this
object will be set to TRUE for the
corresponding entry in this table.
netgearTargetAddrExtStandardMode When this object is set to TRUE, the
management target will be treated as
a 'standard mode' one, in that any
NETGEAR specific extra
varbindspresent in a
standards-based trap/notification will
not be sent to this management
target. Only the varbinds defined in
the standard will be sent.
netgearTargetAddrExtTrapDestIndex This object contains the value of the
trapDestIndex in the corresponding
entry of the RMON trapDestTable.