Owner's Manual

Appendix D. Supported Protocols, MIBs, and Standards | 899
NETGEAR 8800 User Manual
netgearMsmFailoverCause The cause of the last
MSM failover: never(1)
means an MSM
Failover has not
occurred since the last
reboot; admin(2)
means the failover was
initiated by the user;
exception(3) means the
former master MSM
encountered a software
exception condition;
removal(4) means the
master MSM was
physically removed
from the chassis;
hwFailure(5) means a
diagnostic failure was
detected in the master
MSM; watchdog(6)
means that the master
MSM hardware
watchdog timer
expired; keepalive(7)
means the master
MSM failed to respond
to slave keepalive
requests. The MSM
failover will have been
hitless only in the
admin(2) and
exception(3) cases.
netgearFanStatusTable netgearFanStatusEntry Operational status of all
internal cooling fans.
netgearFanNumber Identifier of cooling fan,
numbered from the
front and/or left side of
device.
netgearFanOperational Operational status of a
cooling fan.
netgearFanEntPhysicalIndex The entity index for this
fan entity in the
entityPhysicalTable
table of the entity MIB.
netgearFanSpeed The speed (RPM) of a
cooling fan in the
fantray.
netgearCpuTaskTable All objects Not supported.
Table/Group Supported Variables Comments