Owner's Manual

892 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
dot1agCfmLtrChassisIdSubtype networkAddress(5) will be
returned if senderIDTLV is
received.
dot1agCfmLtrChassisId The first octet contains the
IANA Address Family
Numbers enumeration value
for the specific address type,
and octets 2 through N
contain the network address
value in network byte order.
dot1agCfmLtrManAddressDomain Not supported: value zero will
be returned.
dot1agCfmLtrManAddress Not supported: value zero will
be returned.
dot1agCfmLtrIngress The value returned in the
Ingress Action Field of the
LTM.
dot1agCfmLtrIngressMac MAC address returned in the
ingress MAC address field.
dot1agCfmLtrIngressPortIdSubtype interfaceName(5) will be
returned if present.
dot1agCfmLtrIngressPortId 'interfaceName(5)', then the
octet string identifies a
particular instance of the
ifName object. If the particular
ifName object does not
contain any values, another
port identifier type should be
used.
dot1agCfmLtrEgress The value returned in the
Egress Action Field of the
LTM.
dot1agCfmLtrEgressMac MAC address returned in the
egress MAC address field.
dot1agCfmLtrEgressPortIdSubtype interfaceName(5) will be
returned if present.
dot1agCfmLtrEgressPortId 'interfaceName(5)', then the
octet string identifies a
particular instance of the
ifName object. If the particular
ifName object does not
contain any values, another
port identifier type should be
used.
Table/Group Supported Variables Comments