Owner's Manual

890 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
dot1agCfmMepDbRMepState The operational state of the
remote MEP IFF State
machines. The state would be
any one of the following:
rMepIdle (1),
rMepStart (2),
rMepFailed (3),
rMepOk (4)
dot1agCfmMepDbRMepFailedOkTime The time (SysUpTime) at
which the IFF Remote MEP
state machine last entered
either the RMEP_FAILED or
RMEP_OK state.
dot1agCfmMepDbMacAddress The MAC address of the
remote MEP.
dot1agCfmMepDbRdi State of the RDI bit in the last
received CCM.
dot1agCfmMepDbPortStatusTlv An enumerated value of the
Port status TLV received in
the last CCM from the remote
MEP or the default value. The
value would be one of the
following:
psNoPortStateTLV (0),
psBlocked (1),
psUp (2)
dot1agCfmMepDbInterfaceStatusTlv An enumerated value of the
Interface status TLV received
in the last CCM from the
remote MEP. The value would
be one of the following:
isNoInterfaceStatusTLV (0),
isUp (1),
isDown (2),
isTesting (3),
isUnknown (4),
isDormant (5),
isNotPresent (6),
isLowerLayerDown (7)
dot1agCfmMepDbChassisIdSubtype networkAddress(5) will be
returned if senderIDTLV is
received.
Table/Group Supported Variables Comments