Owner's Manual

Appendix D. Supported Protocols, MIBs, and Standards | 889
NETGEAR 8800 User Manual
dot1agCfmMepTransmitLtmFlags Supported as read only. The
flags field for LTMs
transmitted by the MEP.
Currently useFDBonly(0) is
supported.
dot1agCfmMepTransmitLtmTargetMacAddress Supported as read only. The
Target MAC Address Field to
be transmitted.
dot1agCfmMepTransmitLtmTargetMepId Not supported. To transmit the
LTM destMEPID need not be
given. Value 0 will be
returned.
dot1agCfmMepTransmitLtmTargetIsMepId Not supported. This will return
FALSE always.
dot1agCfmMepTransmitLtmTtl Supported as read only. The
LTM TTL field.
dot1agCfmMepTransmitLtmResult Supported as read only.
Indicates the result of the
operation. Linked with MEP
active state.
dot1agCfmMepTransmitLtmSeqNumber The LTM Transaction
Identifier.
dot1agCfmMepTransmitLtmEgressIdentifier Supported as read only.
Identifies the MEP Linktrace
Initiator that is originating or
the Linktrace Responder that
is forwarding this LTM.
dot1agCfmMepRowStatus The status of the row. The
writable columns in a row
cannot be changed if the row
is active. All columns must
have a valid value before a
row can be activated.
dot1agCfmMepDbTable dot1agCfmMdIndex Maintenance Domain Index.
dot1agCfmMaIndex MA Index.
dot1agCfmMepIdentifier Maintenance Association End
point Identifier.
dot1agCfmMepDbRMepIdentifier Maintenance association End
Point Identifier of a remote
MEP whose information from
the MEP Database is to be
returned.
Table/Group Supported Variables Comments