Owner's Manual

888 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
dot1agCfmMepTransmitLbmStatus Supported as read only. A
Boolean flag set to true by the
bridge port to indicate that
another LBM may be
transmitted.
dot1agCfmMepTransmitLbmDestMacAddress Supported as read only. The
Target MAC Address Field to
be transmitted.
dot1agCfmMepTransmitLbmDestMepId Supported as read only. To
transmit the LBM destMEPID
need not be given.
dot1agCfmMepTransmitLbmDestIsMepId Supported as read only. This
will return FALSE always.
dot1agCfmMepTransmitLbmMessages Supported as read only. The
number of Loopback
messages to be transmitted.
dot1agCfmMepTransmitLbmDataTlv Supported as read only. An
arbitrary amount of data to be
included in the Data TLV if the
Data TLV is selected to be
sent. This will return 0.
dot1agCfmMepTransmitLbmVlanPriority Priority. 3 bit value to be used
in the VLAN tag, if present in
the transmitted frame.
Currently Config in CLI is not
supported: default value 0 will
be returned.
dot1agCfmMepTransmitLbmVlanDropEnable Not supported: return FALSE.
dot1agCfmMepTransmitLbmResultOK Indicates the result of the
operation Linked with MEP
active state.
dot1agCfmMepTransmitLbmSeqNumber The Loopback Transaction
Identifier of the first LBM (to
be) sent. The value returned
is undefined if
dot1agCfmMepTransmitLbmR
esultOK is false.
dot1agCfmMepTransmitLtmStatus Supported as read only. A
Boolean flag set to true by the
bridge port to indicate that
another LTM may be
transmitted.
Table/Group Supported Variables Comments