Owner's Manual

884 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
dot1agCfmMdName Supported as read only. The
Maintenance Domain name.
dot1agCfmMdMdLevel Supported as read only. The
Maintenance Domain Level.
dot1agCfmMdMhfCreation Enumerated value indicating
whether the management
entity can create MHFs (MIP
Half Function) for this
Maintenance Domain.
Supported as read only.
Currently Config in CLI is not
supported. defMHFdefault(2)
value will be returned.
dot1agCfmMdMhfIdPermission Supported as read only.
Currently Config in CLI is not
supported.
sendIdChassisManage(4)
value will be returned.
dot1agCfmMdMaNextIndex Value to be used as the index
of the MA table entries.
dot1agCfmMdRowStatus The status of the row. The
writable columns in a row
cannot be changed if the row
is active. All columns must
have a valid value before a
row can be activated.
dot1agCfmMdTableNextIndex dot1agCfmMdTableNextIndex An unused value for
dot1agCfmMdIndex that will
be used as the MD Index for
the next newly created
domain.
dot1agCfmMaNetTable dot1agCfmMdIndex Maintenance Domain Index.
dot1agCfmMaIndex Index of the MA table
dot1agCfmMdMaNextIndex
needs to be inspected to find
an available index for
row-creation.
dot1agCfmMaNetFormat Supported as read only. The
type of the Maintenance
Association name.
dot1agCfmMaNetName Supported as read only.
Maintenance Association
name.
Table/Group Supported Variables Comments