Owner's Manual

Appendix D. Supported Protocols, MIBs, and Standards | 883
NETGEAR 8800 User Manual
VPLS-MIB (draft-ietf-l2vpn-vpls-mib-02.txt)
The following tables, groups, and variables are supported in this MIB. All tables and variables
of this MIB are supported as read only. The comments here are abbreviated versions of the
description in the RFC documentation.
CFM MIB (IEEE 802.1AG)
This MIB contains objects for the 802.1ag protocol. The following tables, groups, and
variables are supported in this MIB.
Table/Group Supported Variables Comments
vplsConfigTable vplsConfigIndex Unique index for the conceptual row identifying a VPLS
service.
vplsConfigName A textual name of the VPLS. If there is no local name,
or this object is otherwise not applicable, then this
object MUST contain a zero-length octet string.
vplsConfigAdminStatus The desired administrative state of the VPLS service.
vplsConfigRowStatus For creating, modifying, and deleting this row.
vplsConfigMtu The value of this object specifies the MTU of this vpls
instance.
vplsConfigVpnId This objects indicates the IEEE 802-1990 VPN ID of the
associated VPLS service.
vplsStatusTable All objects This table provides information for monitoring Virtual
Private Lan Services (VPLS).
vplsPwBindTable vplsConfigIndex This table provides an association between a VPLS
service and the corresponding Pseudo Wires. A service
can have more than one Pseudo Wire association.
Pseudo Wires are defined in the pwTable.
vplsPwBindIndex
vplsPwBindType The value of this object indicates whether the Pseudo
Wire binding is of type mesh or spoke.
vplsPwBindRowStatus For creating, modifying, and deleting this row.
Table/Group Supported Variables Comments
dot1agCfmMdTable dot1agCfmMdIndex The index to the Maintenance
Domain table.
dot1agCfmMdFormat Supported as read only. The
type (and thereby format) of
the Maintenance Domain
Name.