Owner's Manual

882 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
RFC 5603 (PW-ENET-STD-MIB)
The following tables, groups, and variables are supported in this MIB. All tables and variables
of this MIB are supported as read only. The comments here are abbreviated versions of the
description in the RFC documentation.
pwOperStatus This object indicates the operational status of the PW; it
does not reflect the status of the Customer Edge (CE)
bound interface.
pwLocalStatus Indicates the status of the PW in the local node.
pwRemoteStatus Indicates the status of the PW as was advertised by the
remote.
pwRowStatus For creating, modifying, and deleting this row. This
object MAY be changed at any time.
pwOamEnable This variable indicates if OAM is enabled for this PW. It
MAY be changed at any time.
pwIndexMappingTable All objects This table enables the reverse mapping of the unique
PWid parameters [peer IP, PW type, and PW ID] and
the pwIndex. The table is not applicable for PWs
created manually or by using the generalized FEC.
Table/Group Supported Variables Comments
pwEnetTable pwIndex This table contains the index to the Ethernet tables
associated with this Ethernet PW, the VLAN
configuration, and the VLAN mode.
pwEnetPwInstance If multiple rows are mapped to the same PW, this index
is used to uniquely identify the individual row.
pwEnetPwVlan This object defines the (service-delimiting) VLAN field
value on the PW.
pwEnetVlanMode This object indicates the mode of VLAN handling
between the port or the virtual port associated with the
PW and the PW encapsulation.
pwEnetPortVlan This object defines if the mapping between the original
port (physical port or VPLS virtual port) to the PW is
VLAN based or not.
pwEnetPortIfIndex This object is used to specify the ifIndex of the Ethernet
port associated with this PW for point-to-point Ethernet
service, or the ifIndex of the virtual interface of the
VPLS instance associated with the PW if the service is
VPLS.
pwEnetRowStatus This object enables creating, deleting, and modifying
this row.
Table/Group Supported Variables Comments