Owner's Manual

878 | Appendix D. Supported Protocols, MIBs, and Standards
NETGEAR 8800 User Manual
dataSourceDapsTable dataSourceCapsObject Defines an object that can be a SMON
data source or a source or a destination
for a port copy operation.
dataSourceRmonCaps General attributes of the specified
dataSource. Note that these are static
attributes, which SHOULD NOT be
adjusted because of current resources
or configuration.
dataSourceCopyCaps PortCopy function capabilities of the
specified dataSource.Note that these
are static capabilities, which SHOULD
NOT be adjusted because of current
resources or configuration.
dataSourceCapsIfIndex This object contains the ifIndex value of
the ifEntry associated with this
smonDataSource. The agent MUST
create 'propVirtual' ifEntries for each
dataSourceCapsEntry of type VLAN or
entPhysicalEntry.
portCopyConfigTable portCopySource The ifIndex of the source which will have
all packets redirected to the destination
as defined by portCopyDest.
portCopyDest Defines the ifIndex destination for the
copy operation.
portCopyDestDropEvents The total number of events in which port
copy packets were dropped by the
switch at the destination port due to lack
of resources. Note that this number is
not necessarily the number of packets
dropped; it is just the number of times
this condition has been detected. A
single dropped event counter is
maintained for each portCopyDest. Thus
all instances associated with a given
portCopyDest will have the same
portCopyDestDropEvents value. The
value for this field will be “0” (zero) due
to hardware limitation.
Table/Group Supported Variables Comments